Classic film studio light made by Bardwell and McAlister, Inc. of Hollywood, CA during the Golden Era of film. Repurposed Vintage Hollywood Movie Light with standard Edison E26 bulb to be used as a standing lamp. Light Fixture, Rolling Junior Stand (adjustable height from 4' to 8' feet). Thick metal housing, cast iron details, brass parts, 12" inch Fresnel lens. This light has been refurbished while keeping an industrial aged look intact.
Disassembled, Stripped, Restored, & Repurposed. All functions working properly Tilt, Pan, and Spot / Flood.
* International shipping on this oversized lights is now available. Message us for a quote as the Etsy shipping module doesn't support packages of this size and weight.
Heavy Metal: our classic signature look, sand blasted then buffed with wire brushes, next aged to perfection with metallic rubs. I cannot even begin to explain how COOL this light is, and BIG Really BIG! This light clocks in at 56 lbs, with the stand being another 38lbs.
WARNING - Initial setup may be difficult due to the weight and size of this unit, I would suggest it be done by two people to be safe. Not a toy, a real working Hollywood professional move light (advice available if required). After initial set up the light rolls around and adjusts easily!
* Original vintage Fresnel lens / glass has a few chips (see image) does not effect light quality or present any weakness in glass (chips are cosmetic imperfections)
** I have acquired a stock of replacement lens since this photo was taken - I can replace the Fresnel lens with a chip free lens on request now!!!
Bardwell & McAlister
(B & M Lighting) has been in the business of manufacturing motion picture lighting and production equipment since 1926. Although the company has changed hands several times throughout the years B&M has always maintained the respect of professional filmmakers, providing television and major motion picture studios with quality products and services. During the 1940′s B & M had over 200 employees in five separate plants here in southern California and published it’s own in house news paper called the Spotlight. B&M dedicated three of those facilities to producing bomb loaders and other military equipment for the war effort based upon the design of their camera dolly and other production products.
“But for purists like John Scarpati, a Virginia photographer who restores and sells these lights in small batches, the only way to showcase them is in their original form – dents and all. “I still disassemble every part and do a complete off-frame restoration; I just don’t over-polish,” he says. “These lights exude an unparalleled sense of aesthetics.” His collection consists mainly of Hollywood classics: Mole-Richardson, Otto K Olesen and Bardwell & McAlister, whose imposing keg lights with metal roller stands and 6in Fresnel lenses are particularly sought-after.”
- Financial Times
“American photographer John Scarpati has taken to scouring old Hollywood studio supply warehouses in search of restoration-worthy examples. made between the 1920’s and 1940’s, each light is a one-of-a-kind original, complete with vintage stand or tripod.they exude the sort of patina that can’t be matched by cheaply mass-produced repros, yet ironically, the lights in his etsy shop actually cost less than the replicas available in upscale malls. ‘my personal favorite finish is a heavy, industrial, vibe, explains scarpati. completely refurbished, but still keeping its vintage look intact. less of a polished finished and more real deal.’”
“Restoring these old beauties is definitely a labor of love for Scarpati. After tracking down one or two of these rare creatures stashed in a forgotten corner of some cavernous L.A. warehouse — a feat in itself — he gets them to his personal workshop, where he completely breaks down each to its individual parts. Every knob, lens and metal component is cleaned, stripped and refinished, with impossibly rare missing parts found and fitted. Often, lamps and stands are discovered separately. Scarpati is a stickler for detail, so he actually insists on matching every light to a stand made by the same manufacturer. New wiring, a fresh bulb suitable for home use, and you’re good to go. If by now you’re realizing that all this entails a tremendous amount of sleuthery and hard work, you are correct. Occasionally, the internet will offer up a similar example of industrial hardware from Hollywood’s golden age. But nobody, nobody, even comes close to this level of restoration.”
- Royal Circus
“Vintage Hollywood lights re-purposed as modern works of art. Over the three decades music photographer John Scarpati’s lens has chronicled rock, metal and punk acts including Poison, Circle Jerks, Social Distortion, New York Dolls and Rush. Scarpati has most recently taken to scouring old Hollywood studio supply warehouses in search of restoration-worthy lights to restore for domestic use. The lights were usually made between the 1920's and 1940’s, each is a one-of-a-kind original, complete with vintage stand or tripod. They exude the sort of patina that can’t be matched by mass-produced reproductions.”
Vintage Cinema Light
Vintage Theatre Light
Antique Floor Light
Industrial Studio Spot Lamp
Repurposed Hollywood Movie Light
Payment for any purchased item should be received within 3 days of checkout via PayPal or Credit Card. More time can be allowed if contacted prior to checking out.
Items are sent out within 2-3 days of payment. We generally use Fedex Ground when shipping an item, occasionally we use the United States Postal Service.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Just contact me within: 14 days of delivery
Ship items back to me within: 21 days of delivery
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
We do an excellent job of providing accurate photos and descriptions of our items.
My light restorations are hand picked vintage fixtures, i.e. more than 50 years old; signs of use such as scratches, dings and dents, is normal. I consider them character and authenticity. all lights are converted - tested and verified as fully functional.
Returns are accepted within 14 days of delivery only in original condition. Your order price will be refunded less shipping charges and a 25% restocking fee.
Please contact us immediately if you have any questions or problems we will do our best to make things right!
Conditions of return:
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
All Lights are refurbished using USA specifications as the lights were originally manufactured.
120 Volt AC, E26 sockets (Edison Screw Medium/Standard), and either NEMA 1-15 ungrounded (Type A) or NEMA 5-15 grounded (Type B) plugs. Unless otherwise noted in description. Use in Non North American Regions will require the user purchase the correct current / Plug adapter for use in their county.
* Receiving base for bulbs - These two standards are interchangeable, meaning a US E26 will fit in a European E27 base, and E27 will fit in a E26 base. The only difference is the voltage (for light bulbs). In fact there is only 1 mm difference between the threads of E26 and E27, so they are virtually identical.